Filter
Top Products
Configuring a Wired Network Connection
Most home networks use the Dynamic Host Configuration Protocol
(DHCP)
to
configure network
connections. Home networks that support DHCP
automatically
provide the
IP
address, subnet mas
k,
gateway, and DNS
values
your
1V
needs
to
access the
Internet
so
you don't ha
ve
to enter them
manually.
If
you have a Static
IP
network, see your user
's
manual
for configuration instruc
ti
ons.
To
configure the network connection for a wired network that uses
DHCP,
follow these steps:
1.
Connect your
1V
to
your network
as
shown
in
one
of
the
illust
ra
tions
on page 16.
2.
Turn
on your
1V,
and then go to the
Network Settings
screen.
(Menu->
Network->
Network
Settings)
3.
Select
Start.
4.
The Network Connection screen appears, and verifies the network connection. When the
co
nnect
io
n
has been verified, the
"
You
are connected to the
Internet. If
you have any
problems
using
online
services,
please
contact your
Internet Service
Provider."
message appears. Network set up is
completed.
~
If
your
TV
cannot acquire network the connection
values automatically
or if you want to set the
connection
manually, select
IP
Settings
on the network connection screen. Set
IP
Setting to Enter
manually,
and then enter the
IP
Address, Subnet
Mask
, Gateway,
and
DNS
Server
manually.
~
For more detailed
information, refer to
"Setting
up
the Wired Network" in
thee-Manual.