Filter
Top Products
English
21 How to use
Video stored in the normal recording area, alarm recording area or archive recording area can be located by searching and then
played back.
Use one of the five search methods to locate the required video.
<SEARCH>
ALARM SEARCH ->
ALARM THUMBNAIL SEARCH ->
TIME/DATE SEARCH ->
ARCHIVE AREA SEARCH ->
MOTION DETECTION SEARCH ->
MOVE:JOG SELECT:SHUTTLE
<ALARM SEARCH>
NO DATE TIME CH TOTAL ALARMS
0016 05-01 09:53 1 00016
0015 05-01 09:53 1
0014 05-01 09:53 1
0013 05-01 09:53 1
0012 05-01 09:52 1
0011 05-01 09:51 1
0010 05-01 09:51 1
0009 05-01 03:10 1
MOVE:JOG SELECT:SHUTTLE
<TIME/DATE SEARCH>
RECORDING TOP : 16-01-06 14:46
RECORDING END : 19-01-06 13:32
CHANNEL : --
SEARCH :
DATE TIME
16-01-06 14:46
PREVIEW ->
VIEW ->
CHANGE:JOG SET:SHUTTLE
<ARCHIVE AREA SEARCH>
NO DATE START CH CAPACITY
0001 01-01 01:48 1 TOTAL - 816MB
0002 05-01 09:53 1 USED - 16MB
0003 01-01 02:41 1
0004 02-01 03:10 1
0005 02-01 04:25 1
0006 04-01 02:40 1
0007 04-01 01:25 1
0008 04-01 01:25 1
MOVE:JOG SELECT:SHUTTLE
<MOTION DETECTION SEARCH 1>
SEARCH FROM : ALARM
START : 01-01-06 00:40
END : 05-01-06 10:17
CHANNEL : --
START PREVIEW ->
MOVE:JOG SELECT:SHUTTLE
<MOTION DETECTION SEARCH 2>
SEARCH FROM : ALARM / CHANNEL : 4
START :
05-01-06 10:00
END :
05-01-06 10:17
MOTION SENSOR ->
PREVIEW ->
VIEW ->
MOVE:JOG SELECT:SHUTTLE
0011
0011
0011
0016
0016
0015
0015
0014
0014
0013
0013
0012
0012
0010
0010
0009
0009
0008
0008
0016 0015 0014
0013 0012
0010 0009 0008
SEARCH
Press the SEARCH button:
The <SEARCH> screen appears.
Searching is not possible
during playback and menu
display.
Note: During playback of video, the S-dial,
the J-dial and the front panel
buttons can be used for operations
such as pause and fast-forward.
A Alarm search (P22)
Searches and plays alarm video from the
recording list based on date and time.
Searches and plays all video stored in the alarm
recording area. If pre-alarm video was also
recorded, then the video immediately before the
alarm can be viewed, too.
B
Alarm thumbnail search (P22)
Searches and plays alarm video from the
thumbnail list based on alarm number.
The videos recorded in the alarm recording area
are displayed in the thumbnail list.
C
Date/time search (P23)
Searches the recorded video period based on
date and time.
Video stored in the normal recording area (by
normal recording or timer-controlled recording)
and in the alarm recording area can be played
back by specifying the date and time.
D
Archive area search (P24)
Searches and plays back video stored in the
archive recording area based on date and time.
Plays back video stored in the archive area.
E
Motion detection search (P24)
Searches and plays back video of moving
objects detected by motion sensors. By setting
the motion sensor back to its original location,
and specifying the date and time, motion
detections at a certain sensor can be
investigated.
J (jog) dial S (shuttle) dial
Searching for recorded video