Filter
Top Products
English
Basic settings
37 How to set
The time period setting allows for using different
settings, such as automatic scrolling, masking, motion
sensor detection settings for four periods of the day (for
example: early morning, morning, daytime and evening).
There are two timers (A and B) that can be set to control
time periods as shown below, allowing for a wide variety
of settings to suit every surveillance need.
1
Display the <TIME PERIOD SET> screen as
explained in "Displaying the basic settings screen"
(P34).
The <TIME PERIOD SET> screen appears.
2
Set the timing for TIME PERIOD A.
Example:
T-1: 6:30am, T-2: 11:30am, T-3: 1:30pm, T-4: 6:30pm
1 Turn the S-dial clockwise.
The first "00" of "T-1" starts blinking.
2 Turn the J-dial to select "06" under T-1, and then
turn the S-dial clockwise.
3 Turn the J-dial to select "30" under T-1, and then
turn the S-dial clockwise.
Repeat the same procedure through T-4 to set the
timing of the periods.
3
Set the timing for TIME PERIOD B.
Example:
T-1: 7:30am, T-2: 10:30am, T-3: 2:30pm, T-4: 7:30pm
1 Turn the J-dial to select "07" under T-1, and then
turn the S-dial clockwise.
2 Turn the J-dial to select "30" under T-1, and then
turn the S-dial clockwise.
3 Repeat the same procedure through T-4 to set
the timing of the periods, and then turn the
S-dial clockwise.
When time setting is accepted, the cursor moves to
the automatic scrolling (SEQUENCE).
E Time period setting
12
01
05
09
12
01
05
09
12
01
05
09
01 02 03 04
13 14 15 16
05 06 07 08
09 10 11 12
16
01 02 03 04
13 14 15 16
05 06 07 08
09 10 11 12
0
01
0
01
0
01
(Time period B, sample)
☞7:30 – 10:30
Mask setting for unnecessary
areas
(Time period A, sample)
☞6:30 – 11:30
Automatic screen scrolling
☞11:30 – 13:30
Motion sensor setting
☞13:30 – 18:30
Automatic screen scrolling
☞18:30 – 6:30
Motion sensor setting
☞10:30 – 14:30
Automatic screen scrolling
☞14:30 – 19:30
Mask setting for unnecessary
areas
☞19:30 – 7:30
Motion sensor setting
MENU
(J)
(S)
<TIME PERIOD SET>
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 00:00 00:00 00:00 00:00
5.TIME PERIOD SET
1.INITIAL SET
<MAIN MENU>
<INITIAL SET>
TIME PERIOD A 06:30 11:30 13:30 18:30
TIME PERIOD T-1 T-2 T-3 T-4
TIME PERIOD A 00:00 00:00 00:00 00:00
TIME PERIOD B 07:30 10:30 14:30 19:30
TIME PERIOD B 00:00 00:00 00:00 00:00