Filter
Top Products
English
39 How to set
b Displaying the recording settings screen
Menu configuration
<RECORD SET>
1.NORMAL REC EASY SET ->
2.RECORDING AREA SET ->
3.RECORDING CONDITIONS SET ->
4.NORMAL REC MODE SET ->
5.PROGRAM REC SET ->
6.TIMER SET ->
7.ALARM REC MODE SET ->
8.ALARM OPERATION SET ->
MOVE:JOG SELECT:SHUTTLE
<ALARM OPERATION SET>
ALARM RETRIGGER : OFF
MAIN MON. DISPLAY : FULL
ALARM PRIORITY : LAST
MON.2 DISPLAY : NC
<NORMAL REC EASY SET>
RECORDING DURATION BASE ->
REC RATE BASE ->
CAUTION !
CONNECT CAMERA AND SET TIME
BEFORE SETUP
<RECORDING AREA SET>
TOTAL CAPACITY : 82GB
NORMAL RECORDING AREA : 80 %
AREA FULL RESET ->
ALARM RECORDING AREA : 19 %
AREA FULL RESET ->
ARCHIVE AREA : 1 %
AREA FULL RESET ->
CAUTION : WHEN THE AREA SETTING IS CHANGED,
THE WHOLE AREA WILL BE INITIALIZED !
<RECORDING CONDITIONS SET>
NORMAL RECORDING AREA
OVERWRITE : ON
ALARM RECORDING AREA
OVERWRITE : ON
REMAINING DISK WARNING : **
SERIES RECORDING : OFF
AUTO DELETE : OFF
<NORMAL REC MODE SET>
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
REC RATE : 12.5FPS ( 42H)
REC PROGRAM GROUP : OFF
<PROGRAM REC SET>
PROGRAM : P-1
SELECT INDIVIDUAL CAMERA RATE(FPS)
01: 0.5 02: 0.5 03: 0.5 04: 0.5
05: 0.5 06: 0.5 07: 0.5 08: 0.5
09: 0.5 10: 0.5 11: 0.5 12: 0.5
13: 0.5 14: 0.5 15: 0.5 16: 0.5
NORMAL REC : 67H
<TIMER SET>
WEEK START STOP PROGRAM FPS SET
SUN --:-- --:-- OFF 12.5 FPS OFF
MON --:-- --:-- OFF 12.5 FPS OFF
TUE --:-- --:-- OFF 12.5 FPS OFF
WED --:-- --:-- OFF 12.5 FPS OFF
THU --:-- --:-- OFF 12.5 FPS OFF
FRI --:-- --:-- OFF 12.5 FPS OFF
SAT --:-- --:-- OFF 12.5 FPS OFF
DLY --:-- --:-- OFF 12.5 FPS OFF
EXT ***** ***** OFF 12.5 FPS OFF
<ALARM REC MODE SET>
ALARM RECORDING : OFF
PICTURE QUALITY : ENHANCED
AUDIO RECORDING : OFF
ALARM INTERLEAVE : ONLY
REC RATE: 12.5FPS, DURATION: 20SEC
PRE-ALARM RECORDING : ***
REC RATE: **** FPS, DURATION: ****
=> (01731 ALARMS CAN BE RECORDED)
ALARM TRIGGER : ALARM
MOTION SENSOR ->
b Di
sp
l
ay
i
ng t
h
e recor
di
ng sett
i
ngs screen
1
Press the MENU button and use the
J-dial to select "2. RECORD SET",
and then turn the S-dial clockwise.
The <RECORD SET> screen appears.
2
Turn the J-dial, select the desired
submenu, and turn the S-dial
clockwise.
The selected screen (A~H) is
displayed. Refer to the appropriate
pages for the settings.
<MAIN MENU>
1.INITIAL SET ->
2.RECORD SET ->
3.GENERAL SET ->
4.SCREEN SET ->
(S)
MENU
(S)
(J)
H Alarm operation/
display settings (P60)
Sets the operation and display to
use at alarm detection.
A
Easy recording settings
(P40)
The recording duration or rate can be
selected.
Easy recording settings 1:
Sets the standard recording duration
Easy recording settings 2:
Sets the standard recording rate
B Recording area settings
(P43)
Displays the total capacity of the
internal hard disk. The recording
capacity for each area (normal, alarm
recording and archive) can be set.
C Recording conditions
setting (P46)
Specifies settings such as allowing
overwrite or stopping instead when the
normal or alarm recording area of the
internal hard disk is full.
D Normal recording settings
(P49)
Sets the image quality, audio, recording
rate and programmed recording.
E Programmed recording
settings (P50)
Sets the recording rate of the recording
camera.
F Timer settings (P51)
Sets the recording according to day of
the week and time.
G Alarm recording settings
(P55)
Sets the alarm recording, pre-alarm
recording and motion sensors.
b Regarding network downloads
When downloading image data of the DVR via
the network, an archive capacity area of
approximately 2GB is necessary for best
quality images. (40,000 images without audio)
Recording settings