Filter
Top Products
210 Fibre Channel Interface Manual, Rev. D
12.12 Mode Select (10) command
The Mode Select (10) command provides a means for the initiator to send a list of drive operating mode
parameters to the drive.
See the Mode Select (6) command (Section 12.11) for a description of the fields in this command. Initiators
should issue Mode Sense prior to Mode Select to determine supported pages, page lengths, and other param-
eters.
Table 141: Mode Select (10) command (55h)
Bit
Byte
76543210
001010101
1 Reserved PF Reserved SP
2
Reserved
3
Reserved
4
Reserved
5
Reserved
6
Reserved
7 (MSB)
Parameter List Length
8 (LSB)
9
Control
55h