Filter
Top Products
Displaying the LDAP access privilege levels
The List LDAPGroups command displays all defined LDAP group with their access privilege level.
To display LDAP group access privilege levels:
At the Sentry: prompt, type list ldapgroups and press Enter.
Example
The following command displays all LDAP groups with their access privilege level:
Sentry: list ldapgroups<Enter>
LDAP Access Environmental
Group Name Level Monitoring
LDAPAdmin Admin Allowed
PowerUser User Allowed
User On-Only Not Allowed
Guest View-Only Not Allowed
Adding outlet access to an LDAP group
The Add OutletToLDAP command grants an LDAP group access to one or all outlets. To grant access
for more than one outlet, but not all outlets, you must use multiple Add OutletToLDAP commands.
To grant outlet access to an LDAP group:
At the Sentry: prompt, type add outlettoldap, optionally followed by an outlet name and a group name.
Press Enter, or
Type add outlettoldap all, followed by a group name and press Enter.
Examples
The following commands grant the LDAP group PowerUser access to outlets A1 and Webserver_1:
Sentry:add outlettoldap .a1 poweruser<Enter>
Sentry:add outlettoldap WebServer_1 poweruser<Enter>
Deleting outlet access for an LDAP group
The Delete OutletFromLDAP command removes an LDAP group’s access to one or all outlets. You
cannot remove access to any outlet for an administrative level group.
To delete outlet access for an LDAP group:
At the Sentry: prompt, type delete outletfromldap, optionally followed by an outlet name and a group
name. Press Enter, or
Type delete outletfromldap all, followed by a group name and press Enter.
Adding outlet group access to an LDAP group
The Add GroupToLDAP command grants an LDAP group access to a outlet group. To grant access for
more than one outlet group, you must use multiple Add GroupToLDAP commands.
To gran toutlet group access to an LDAP Group:
At the Sentry: prompt, type add grouptoldap, optionally followed by an outlet group name and an
LDAP group name. Press Enter.
Examples
The following commands grants to LDAP group PowerUser access to the outlet groups ServerGroup_1
and ServerGroup_2:
Sentry:add grouptoldap servergroup_1 poweruser<Enter>
Sentry:add grouptoldap servergroup_2 poweruser<Enter>
Deleting outlet group access for an LDAP group
The Delete GroupFromLDAP command removes an LDAP group’s access to a outlet group. You
cannot remove access to any group for an administrative level group.
To delete outlet group access for an LDAP group:
At the Sentry: prompt, type delete groupfromldap, optionally followed by a outlet group name and an
LDAP group name. Press Enter.
60 • Advanced Operations Sentry PT22
Installation and Operations Manual