Filter
Top Products
Displaying outlet status
The Status command displays the on/off status of one or more outlets. The command displays the status of
only those outlets for which the current username has power control access.
This display includes the outlet absolute and descriptive names, the Outlet State reported to the Sentry
by the outlet and the current Control State being applied by the Sentry. If you do not specify any
parameter with this command, the status of all accessible outlets is displayed.
For more information on outlet and control state values, see Outlet Control on page 12.
To display on/off status of one or more outlets:
At the Sentry: prompt, type status, followed by an outlet name, and press Enter, or
Type status, followed by a group name, and press Enter, or
Type status and press Enter.
Examples
The following command displays the on/off status of the outlet named FileServer_1:
Sentry: status FileServer_1<Enter>
Outlet Outlet Outlet Control
ID Name State State
.A3 FileServer_1 On On
The following command displays the on/off status of all accessible outlets:
Sentry: status<Enter>
Outlet Outlet Outlet Control
ID Name State State
.A1 DataServer_1 On On
.A2 WebServer_1 On On
.A3 FileServer_1 On On
.A4 On On
The following command displays the on/off status for outlets in the group ServerGroup_1:
Sentry: status ServerGroup_1<Enter>
Group: ServerGroup_1
Outlet Outlet Outlet Control
ID Name State State
.A1 DataServer_1 On On
.A2 WebServer_1 On On
.A3 FileServer_1 On On
Displaying accessible outlets
The List Outlets command displays accessible outlets for the current user. The display includes the
absolute and descriptive name of all outlets assigned to the current user.
To display accessible outlets:
At the Sentry: prompt, type list outlets and press Enter.
Example
The follow command displays all accessible outlets for the current user:
Sentry: list outlets<Enter>
Outlet Outlet
ID Name
.A1 DataServer_1
.A2 WebServer_1
Sentry Commander - PT40 Operations • 23
Installation and Operations Manual