Filter
Top Products
Displaying FTP configuration information
The Show FTP command displays all FTP configuration information.
• FTP Host IP address
• FTP Host username and password
• Firmware filepath and filename
To display FTP configuration information:
At the Sentry: prompt, type show ftp and press Enter.
Example
The following command displays the FTP configuration information:
Sentry: show ftp<Enter>
FTP Configuration
Host IP Address: 12.34.56.99
Username: guest
Password: OpenSesame
Directory: ftp://sentry
Filename: snb_s50a.bin
SNTP Administration
Sentry supports the use of a network time service to provide a synchronized time reference.
Setting the SNTP server address
The Set SNTP command is used to set the primary and secondary SNTP server addresses.
To set the SNTP server address:
At the Sentry: prompt, type set sntp, followed by primary or secondary, and the SNTP server IP
address. Press Enter.
Example
The following command set the primary SNTP server address to 204.152.184.72:
Sentry: set sntp primary 204.152.184.72<Enter>
Displaying SNTP configuration information
The Show SNTP command displays all SNTP configuration information.
To display SNTP configuration information
At the Sentry: prompt, type show sntp and press Enter.
Example
The following command displays the SNTP configuration information:
Sentry: show sntp <Enter>
SNTP Date/Time (GMT): 2003-02-21 21:32:48
SNTP Primary IP Address: 204.152.184.72
SNTP Secondary IP Address: 0.0.0.0
Sentry Commander - PT40 Operations • 39
Installation and Operations Manual