Filter
Top Products
Deleting serial/Pass-Thru port access for a user
The Delete PortFromUser command removes a user’s access to a serial/Pass-Thru port. You cannot
remove access to any serial/Pass-Thru port for an administrative level user.
To delete serial/Pass-Thru port access for a user:
At the Sentry: prompt, type delete portfromuser, optionally followed by a Port name and a username.
Press Enter.
Displaying user outlet, group and serial/Pass-Thru port access
The List User command displays all accessible outlets, groups and serial/Pass-Thru ports for a user.
To display user outlet, group and serial/Pass-Thru port access:
At the Sentry: prompt, type list user, optionally followed by a username. Press Enter.
Example
The following command displays information about the user JaneDoe:
Sentry: list user janedoe<Enter>
Username: JANEDOE
Outlet Outlet
ID Name
.A1 DataServer_1
.A2 WebServer_1
Groups:
ServerGroup_1
ServerGroup_2
More (Y/es N/o): Y
Ports:
Port Port
ID Name
Console Console
Modem Modem
1 router1
JaneDoe may access the following outlets, groups and serial ports: outlet A1 which has a descriptive
name of DataServer_1, outlet A2 which has a descriptive name of WebServer_1, group ServerGroup_1
group ServerGroup_2, Console serial port, Modem serial port and Pass-Thru port 1 which has a
descriptive name of router1.
Group Administration
Creating a group name
The Create Group command creates a new group name.
To create a group name:
At the Sentry: prompt, type create group, optionally followed by a descriptive name of up to 24
alphanumeric and other typeable characters (ASCII 33 to 126 decimal - spaces are not allowed. Group
names are not case sensitive). Press Enter.
Example
The following command creates group name ServerGroup_1:
Sentry: create group ServerGroup_1<Enter>
Removing a group name
The Remove Group command removes a group name.
To remove a group name:
At the Sentry: prompt, type remove group, optionally followed by a username. Press Enter.
Example
The following command removes group name ServerGroup_1:
Sentry: remove group ServerGroup_1<Enter>
Sentry Commander - PT40 Operations • 29
Installation and Operations Manual