Filter
Top Products
22
Basic Connection
Connection Using Antenna Cables and SCART
Cables
The following connection is the basic connection to watch or record TV
programmes.
Important!
• Be sure to turn off and unplug from the AC outlet this Recorder and all
equipment before connecting the cables.
• Read through the operation manual for the equipment to be connected.
1
Connect the TV antenna
cable to the ANTENNA IN
jack on the rear of this
Recorder.
2
Connect the ANTENNA
OUT jack on the rear of
this Recorder to the
antenna input jack on your
TV using the supplied
coaxial cable.
3
Connect the LINE 1(TV)
jack on the rear of this
Recorder to the SCART
input jack on your TV using
the SCART cable (commer-
cially available).
When connecting with your
Satellite receiver or de-
coder
4
Connect the LINE 2(DE-
CODER/EXT) jack on the
rear of this Recorder to the
SCART output jack on your
Satellite receiver or de-
coder using the SCART
cable (commercially
available).
NOTE
• To connect using S-video or
component cables, see “Using
Other Types of Video Output” on
page 23.
Important!
• When connecting to your TV using
SCART cable:
When playing back HDD/DVD, the
recorder side input is selected
automatically. When the channel is
changed at the TV side under this
setting, the selection is normally
changed to the reception channel,
but it may not be changed for
certain TV models. If this happens,
press the TV/DVD button on the
remote control.
TV
Decoder or Satellite System
The Recorder
To LINE 1(TV)
SCART
To SCART
input
To ANTENNA
IN jack
To ANTENNA
OUT jack
To antenna
input jack
Coaxial cable
(supplied)
Antenna cable
(commercially available)
SCART cable
(commercially
available)
SCART cable
(commercially
available)
To LINE 2
SCART
To SCART
output
1
2
3
4
DV-HR350H/300H-022-025 2004.4.8, 10:36 AM22