Filter
Top Products
28
Channel Setting
This Recorder can receive a maximum of 84
channels as shown below by presetting the
channels into memory.
(UHF: E21 to E69)
1
Press START MENU to display
the “START MENU” screen.
2
Press '/"/ \/| to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
Channel Setting
VIDEO Plus
+
3
Press '/" to select “MANUAL
TUNING”, then press SET/
ENTER.
4
Press '/" to select “PRESET”,
then press \/| to choose the
required preset channel.
MODE SETT I NG
MANUAL TUN I NG
CHANNEL SORT
CLOCK SETT ING
POST CODE
:SELECT
:RETURN:ENTER
➛
PRESET
CHANNEL
FINE TUNING
DECODER O
SKIP O
:SELECT
AAA 84
CH25
N OFF
N OFF
:RETURN
:CHANGE
:ENTER
5
Press '/" to select
“CHANNEL”, then press \/| to
start tuning in either direction.
• If it is not the desired channel, press
\\
\\
\/
||
||
| to continue tuning.
6
Press '/" to select “FINE
TUNING”. Then press and hold \/
| until the sharpest colour picture
is obtained.
7
Press '/" to select “DE-
CODER”. This is preset to “OFF”.
If you connect a decoder, you
must use \/| to turn the decoder
function “ON”.
8
Press '/" to select “SKIP”,
then press \/| to select “ON” or
“OFF”.
• The SKIP function determines
whether the channel can be selected
when using the CH
''
''
'/
""
""
" instead of
the Number buttons.
9
Press SET/ENTER to store this
channel. The Recorder will incre-
ment to the next channel up.
• If any more channels are to be tuned
in, repeat this procedure.
• Once all the channels have been
tuned in. Press START MENU or
EXIT to return to the normal screen.
Channel Sort
When your Recorder tunes in broadcast
channels automatically, it sorts them into a
standard order using internal information. You
can change the order of the channel with the
following procedure.
1
Press START MENU to display
the “START MENU” screen.
2
Press '/"/ \/| to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
3
Press '/" to select “CHANNEL
SORT”, then press SET/ENTER.
CHANNEL SO
MOVE
CANCEL
NAME
RT
4
Press '/" to select “MOVE”,
then press SET/ENTER.
MOVE
1CH50 7
2BBC1 8
3BBC2 9
4ITV 10
1/5
13
14
15
16
5
Press '/"/ \/| to highlight the
channel to be moved. Then press
SET/ENTER.
6
Press '/"/ \/| to highlight the
new position for the channel. Then
press SET/ENTER.
MOVE
1BBC1 7
2BBC2 8
3ITV 9
4CH4 10
5CH50 11
6CH5 12
:SELECT
1/5
13
14
15
16
17
18
:RETURN:ENTER
DV-HR350H/300H-026-033 2004.4.8, 10:37 AM28