Filter
Top Products
30
Post Code Security
This feature should allow the Police to identify
you as the owner of the Recorder if it is
stolen. Each time the Recorder is turned on,
your postcode will be displayed for 5
seconds. Your postcode cannot be changed
or removed without first entering the correct
PIN-number. If you with to use this function,
follow the procedure below.
1
Press START MENU to display
the “START MENU” screen.
2
Press '/"/ \/| to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
Post Code
VIDEO Plus
+
3
Press '/" to select “POST
CODE”, then press SET/ENTER.
4
Press the Number buttons or '/
" to enter your desired PIN
number.
• This must be a 4 digit number in the
range 0000 – 9999.
MODE SETT I NG
MANUAL TUN I NG
CHANNEL SORT
CLOCK SETT ING
POST CODE
:SELECT
:RETURN:ENTER
5
After entering the PIN number,
press | to highlight the first digit
of “POST CODE”.
6
To enter your post code press '/
" to scroll through the charac-
ters, then press \/| to move to
the next position.
7
Press SET/ENTER to confirm.
8
Write your PIN number in the box
provided for future reference.
Changing PIN NUMBER
You can change your PIN number at any time
with the following procedure.
1
Press START MENU to display
the “START MENU” screen.
2
Press '/"/ \/| to select
“OTHER SETTINGS 2”, then press
SET/ENTER.
3
Press '/" to select “POST
CODE”, then press SET/ENTER.
4
Press the Number buttons or
'/" to enter your current PIN
number, then press SET/ENTER.
5
Press \ to re-select PIN number.
6
Enter your new PIN number. Press
SET/ENTER to confirm, then
press START MENU or EXIT to
return to a normal screen.
Important!
• Keep your Operation Manual separate
from your Recorder.
NOTE
• Your Postcode can be changed at any
time, but you must first enter your correct
PIN number. If the wrong PIN number is
entered, an “ERROR” will appear. Re-enter
the correct number.
DV-HR350H/300H-026-033 2004.4.8, 10:37 AM30