76
ERASE ALL TITLES
HDD (ORIGINAL)
HDD (PLAYLIST)
DVD (ORIGINAL)
DVD (PLAY LIST)
SELECT AN ITEM BELOW TO ERASE ALL TITLES.
82:0121/52
Editing an Original Title (HDD/DVD)
Erasing All Titles
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
This erases the entire contents of a HDD or
DVD-RW. (Except titles for which title protect
has been set.)
You can erase the following:
• HDD (ORIGINAL):
Erases all titles recorded on the HDD.
When originals are erased, play lists are
also erased.
• HDD (PLAY LIST):
Erases all play lists created on the HDD.
Even if play lists are erased, the original
titles are not erased.
• DVD (ORIGINAL):
Erases all titles recorded on DVD. When
originals are erased, play lists are also
erased.
• DVD (PLAY LIST):
Erases all play lists created on DVD. Even if
play lists are erased, the original titles are
not erased.
NOTE
• When a Video mode disc is finalized, you
can no longer erase all titles.
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1
Select “EDIT/ERASE” in “START
MENU” screen, then press SET/
ENTER.
2
Press '/" to select “ERASE
ALL TITLES”, then press SET/
ENTER.
3
Press '/" to select what you
want to erase, then press SET/
ENTER.
4
Press \/| to select “YES”, then
press SET/ENTER.
• Carefully confirm before executing
erase.
• If you select “NO” and enter, the
screen in step
3
appears.
5
Press SET/ENTER.
• All titles (or play lists) are erased, and
the screen in step
3
appears.
To restore the erased content, press
Green (C) (CNL ERASE). Operate
according to the instructions on the
screen. (Note: You can only undo
once, to the state immediately before
the last erase.)
6
Press EXIT to exit from Edit
mode.
VIDEO Plus
+
Erasing by Selecting a
Title (or Chapter)
HDD
VR MODE
DVD-RW
VIDEO MODE
DVD-RW
DVD-R
Allows you to select titles to erase, and erase
them in a batch.
• When erasing original titles:
If original titles are erased, those titles will
also be erased from play lists.
• When erasing play lists:
Even if play lists are erased, the original
titles will not be erased.
NOTE
• Up to a maximum of 20 titles (chapters)
can be selected at one time.
• When a Video mode disc is finalized, you
can no longer select and erase titles.
• You cannot erase chapters in DVD-RW/R
discs (Video mode).
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1
Select “EDIT/ERASE” in “START
MENU” screen, then press SET/
ENTER.
2
Press '/" to select “ERASE
TITLES”, then press SET/ENTER.
3
Press '/"/ \ /| to select titles
to erase.
• If you press Red (B) (CHAPTER), the
screen will switch to the chapter
thumbnail display so you can select
and erase chapters.
4
Press SET/ENTER.
• If there are other titles (chapters) you
wish to erase, select with
''
''
'/
""
""
"/
\\
\\
\/
||
||
|
and press SET/ENTER.
5
Press Yellow (D) (ERASE).
6
Press \/| to select “YES”.
•
Once a title (chapter) has been erased,
it cannot be restored. Carefully confirm
before executing erase.
• If you select “NO” and enter, operate
from step
4
again.
7
Press SET/ENTER.
•
All selected titles (chapters) are erased.
• To cancel erase, press Green (C)
(CNL ERASE).
• Operate according to the instructions
on the screen.
8
Press EXIT to exit from Edit mode.
DV-HR350H/300H-070-076 2004.4.8, 1:00 PM76