Filter
Top Products
11
Using your DTR remote control
The next few pages of this manual will help you to get the most out of your DTR.
It is worth keeping this manual to hand for a few days whilst you get to know how
it works. For reference, a few of the basic functions are shown below. Note they are
all described in more detail later on in this manual.
Basic Functions
Turning your DTR on Press the button.
Changing channels Press the CH+ or CH- buttons.
Selecting a channel by number Press the appropriate digits into the number keypad.
Pause Live TV or recorded Press the top half of the button.
programmes
Fast Forward Press the button. Press it again to go forward faster.
Rewind Press the button. Press it again to rewind faster.
To view the Quick TV Guide Select the UP or DOWN arrows,
use all arrows to navigate.
Using the Programme Guide Press the GUIDE button. Navigate using the arrow buttons.
Look at a future day’s programmes
Press the GREEN button whilst in the GUIDE.
Setting a Reminder Press the YELLOW button whilst that programme is
highlighted in the GUIDE.
Recording a programme from Press the button whilst on a highlighted
the Guide programme in the GUIDE. Then press the button
to conrm in your Planned Recordings list.
Viewing Top Up TV programmes Press the button whilst in the GUIDE.
Search for a programme by name Press the RED button whilst in the GUIDE. Use the
numbered buttons to enter text.
Using your Programme Library Your Library is where all of your recorded and Top Up TV
programmes are stored. Press LIBRARY to access.
Instant Record Press the button and hold for three seconds,
whilst watching the programme.
Watch whilst still recording Select a programme to watch from the Planned
Recordings screen, even if it hasn’t nished yet.
To stop a recording press and hold for three seconds.
Customise Top Up TV Anytime
Keep your Top Up TV Channel selections up to date and
ensure you’re making the most of the disk space available
by selecting option 4 from the main menu (See page24).
This will bring up the Setup menu. Select Option 1 in the
Set up Menu to scan for new channels.
Getting Started