Filter
Top Products
32
Tuner conict resolution
In some cases there may not be enough tuners for
all the functions your DTR is trying to perform, for
example if two recordings are taking place and you
try to change channels, you will see this pop-up
menu. If you really wish to change channels, go
to the Planned Recordings menu and cancel the
recording. Pressing the RED button will take you to
the Planned Recordings menu.
Top Up TV Anytime conict resolution
Watching live TV may conict with the requirement
to record Top Up TV Anytime programmes. This may
occur if you are watching a programme when the
Top Up TV Anytime programmes start, you switch
on your DTR while Top Up TV Anytime programmes
are being recorded or you are watching a Top Up
TV Anytime programme but then try to change
channels.
In the event of a conict, you will see this pop-up. If you press the RED button, you will
continue to record the Top Up TV Anytime programmes, however, if you press the GREEN
button the Top Up TV Anytime recordings will be abandoned and your DTR will be considered
to be in override mode.
Your DTR will remain in override mode for one hour or until it is placed in standby.
In the same way, if your DTR is trying to collect TV
listings or Top Up TV Anytime information, your
DTR will pop-up this warning. If you press the RED
button, you will continue to collect the required
information, however, if you press the GREEN button
the task will be abandoned.
By overriding this task, your DTR may fail to update the TV listings and as a consequence, may
fail to record Top Up TV Anytime programmes.
Loss of signal
If your DTR can not detect a signal, it will present this icon in the top centre of your TV screen.
Check all connections or refer to Reception Problems on page 30.