Filter
Top Products
24
Setting Up
From the MAIN MENU, press 4 or select Set-Up.
Use the UP and DOWN buttons to highlight the sub-menu you wish to enter and press the OK
button, or press the number button that is associated with the sub-menu.
If you have trouble scanning for channels or with any aspect of the installation, refer to page
10 for more information or check the Troubleshooting guide in this manual.
Scan for Channels
You will have performed this option automatically as
part of the installation process, but if for any reason
you wish to re-scan for new channels (if you have
moved or have a new aerial for example), make sure
that all the connections to your DTR are connected
correctly. Select Option 1 in the Set up Menu to
scan for new channels. Press the GREEN button to
start the automatic search for available channels.
To exit, press the BACK button.
Once the scan has started you can cancel it
by pressing the RED button.
You can monitor the progress of the search as your DTR rst searches for digital broadcast
frequencies and then for specic programmes on those frequencies. Finally your DTR will
attempt to acquire the Top Up TV Anytime service.
When the scan is complete, the text at the bottom of the screen will say ‘Scan complete’
and the GREEN button will re-appear to enable you to re-scan if required. To exit this menu
option, press the BACK button.
Throughout the set-up menus, we will list the available settings within an option. Please
note that the DTR factory default will be UNDERLINED. If at anytime your are not sure what
setting to make, refer to the relevant page and look for the setting that is underlined.