Sharp TU-TV322H DVR User Manual


 
28
Child Lock
This menu option enables you to set-up Parental
Control levels and to determine the access you and your
family have to programmes. As soon as you select this
option, you will be prompted to enter your Personal
Identication Number (PIN). The default number for this
is 0000. It is highly recommended that you change this
number as soon as possible. Once you have entered a
valid PIN you are given the option to change the PIN by
pressing the RED button and following the simple steps
on-screen.
Maximum Certicate
This sets the maximum certicate value allowed on any viewed content (live or recorded).
If at anytime a user tries to view programmes with a certicate higher than the maximum
certicate allowed, the DTR will blank the screen, mute the audio and pop-up the PIN entry
window. Unless a valid PIN is entered, the programme cannot be viewed. The available
settings are; U, PG, 12, 15, G or 18. Note that the default is 18 which means that there is no
automatic block of any content from being viewed. You should lower this to a level suitable
for the people with access to your DTR.
Note that setting a certicate does not limit the programmes that can be recorded, only what
can be viewed. This allows viewing decisions to be made when the viewer is present. This
may not be foolproof – we rely on broadcasters to rate their programmes appropriately.
Lock Period Start & Lock Period End
This allows the DTR to be locked down during the START
and END times. Use the LEFT and RIGHT arrow buttons to
amend the time in 15 minute steps. In both cases, the
default value is OFF.
Lock
Once you have set lock periods, you will have to activate
them by setting Lock on. Likewise, you can also turn lock
periods o with this option.
Channel Lock
This menu allows you to individually lock selected channels. Each time a locked channel is
selected to be watched you will be required to enter your PIN.