Sharp TU-TV322H DVR User Manual


 
23
Additional DTR Functions
Tuner swap
Your DTR has two tuners which means it can receive two dierent channels at the same time.
You can switch between these two channels by pressing 0 on your remote control. If that
channel is paused, it will automatically switch to play to allow you to watch the programme.
Furthermore, if you are watching a recorded programme, your DTR will pause that
programme and switch to the programme currently being received by one of the tuners.
Pressing 0 again will switch to the other tuner and pressing 0 again will return you to your
recorded programme and resume playback.
Watch whilst recording
This is the ability to view a programme that is currently being recorded as part of a scheduled
record or an instant record process. There are two ways to view a programme while it is being
recorded. From Planned Recordings highlight the programme you wish to watch and press
the RED button on your remote control. This will start the programme from the beginning.
You can also change channels to the one that is recording your programme and use trick
modes such as
REWIND to move back through the recording to your desired point.
Pause, rewind & fast forward
These are functions that enable you to move forward or rewind
through a recording. There a nine incremental speeds for both
forward and rewind, these are x
1
/4 , x
1
/2, x1, x2, x4, x8, x16, x32
& x64.
Note:
That quarter and half speed modes are only accessed from Pause mode. To enter
Pause mode, press the PAUSE button on your remote control.
Note: USB port on the product shall not be functional until this feature is available with
software update over air download.
Using Your DTR