Filter
Top Products
Chapter 9 Maintenance and Troubleshooting
119
9-3 Alarms
TC EXT! on A time code or user bits preset operation
was attempted with extended menu item
626 “TC MODE” set to “ext preset.”
Try the operation again after setting
extended menu item 626 “TC MODE” to
“int preset.”
See 8-3-2 “Extended Menu Operations”
(page 102) about how to make this setting.
REGEN mode! on A time code or user bits preset operation
was attempted with extended menu item
626 “TC MODE” set to “int regen,” “ext
regen,” or “rp188 regen.”
REC-PAUSE! on A time code or user bits preset operation
was attempted with recording paused.
Try the operation again after stopping
recording.
REC mode! limit An attempt was made to switch video or
audio signals during recording.
REC mode! off An attempt was made to display the
system menu “DISC MENU” during
recording.
REC mode! limit The THUMBNAIL button was pressed
during recording.
REC mode! off An attempt was made to display DRIVE
MAINTENANCE in the maintenance
menu during recording.
No SEL List limit The SUBCLIP button was pressed
without loading a clip list from the disc
into the current clip list.
Try the operation again after loading a clip
list.
For details, see 5-3-3 “Loading a Clip List
From Disc Into the Current Clip List” (page
68).
No SUB Clip limit A button in the playback control section
was pressed when there were no sub
clips in the current clip list.
Playback is not possible without a sub clip
in the current clip list.
SB CLP mode limit The SHIFT button and the THUMBNAIL
button were pressed together with the
SUBCLIP button lit.
Press the SUBCLIP button, turning it off,
and try the operation again.
SUB CLIP NG limit The SHIFT and SET buttons were
pressed together when IN and OUT
points were not set correctly (the OUT
point was set before the IN point, etc.).
Set the IN and OUT points correctly and try
the operation again.
No List! off An attempt was made to delete a clip list
with no clip lists saved on the disc.
This operation is not possible.
STOP ONCE! limit The SUBCLIP button was pressed
during playback of a clip list.
Try the operation again after stopping
playback.
STOP ONCE! off An attempt was made to display the
CLIP menu during playback.
No EM Space off Recording of an essence mark failed
because the number of essence marks
recorded on the disc reached the upper
limit of the specifications of this unit.
Use the PDZ-1 Proxy Browsing Software to
delete unneeded essence marks.
EM Full! off An attempt was made to add an essence
mark with the number of recorded
essence marks at the upper limit of the
specifications of this unit.
Formatting! off An attempt was made to display the
DISC MENU page in the system menu
during an auto format.
Wait until the end of the auto format.
Disc Damage off An attempt was made to record, display
an E-E picture, record an essence mark,
or add a quick scene selection sub clip
when there was no free sparing area.
This disc cannot be recorded. Exchange
the disc.
Message in time
data display
Display
condition
a)
Description Action