Filter
Top Products
Chapter 8 Menus
93
8-3 Extended Menu
131 AUDIO VOLUME Select whether each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs
on the control panel is effective to control the audio recording level and
playback level on each channel or the ALL/CH-1 adjustment knob alone
functions as a master control to control the audio level on all channels
together.
each
: Each of the ALL/CH-1, CH-2 to CH-4 adjustment knobs is effective
to control each channel.
all: The ALL/CH-1 adjustment knob alone functions as a master control.
When “all” is selected, the ALL indicator to the right of the ALL/CH-1
adjustment knob lights up.
143 INDEX PICTURE POSITION Select the frame of the clip to use as the thumbnail image (index picture)
when recording.
0sec
to 10sec: Can be set in the range from 0 seconds (first frame of the
clip) to10 seconds, in units of 1 second.
Menu items in the 100s, relating to the control panels
Item number Item name Settings
Menu items in the 200s, relating to the remote control interface
Item number Item name Settings
214 REMOTE INTERFACE When the remote control switch is set to REMOTE, select the device from
which to remote-control this unit.
9PIN
: Device connected to the REMOTE connector.
i.LNK: Device connected to the S400 (i.LINK) connector.
215 PC REMOTE Specify whether to enable FAM connections between this unit and
remote computers.
dis
: Disable FAM connections.
ena: Enable FAM connections.
257 NETWORK ENABLE Select the remote control switch positions which enable network
connections.
net
: Only when the switch is set to “NETWORK.”
n&9P: When the switch is set to “NETWORK,” and when the switch is set
to “REMOTE” and extended menu item 214 is set to “9PIN.”
a)
a) FTP connections can be made only when the device connected to the REMOTE
connector (D-sub 9 pin) is in stop mode. During FTP connections, the device connected
to the REMOTE connector cannot be used to control this unit.
Menu items in the 300s, relating to editing operations
Item number Item name Settings
301 VAR SPEED RANGE FOR
SYNCHRONIZATION
Select the playback speed range when carrying out playback in variable
speed mode from a remote control unit connected to the REMOTE
connector.
–
2~+2: –2 to +2 times normal speed.
wide: –2.20 to +2.20 times normal speed.
308 SELECTION OF STD/NON-STD
FOR COMPOSITE VIDEO IN
Select the STD or NON-STD mode in accordance with a composite
video or S-video input.
STD
: The STD mode is always used (forced STD mode).
N-STD: Use this setting when the input video signal is unstable (forced
NON-STD mode).
Note
When using a VCR with no built-in time base corrector (e.g. a home-use
VHS-system VCR), select N-STD.
310 REC INHIBIT Select whether recording is inhibited.
off
: Do not inhibit recording.
on: Inhibit recording.