Filter
Top Products
Chapter 8 Menus
97
8-3 Extended Menu
607 U-BIT BINARY GROUP FLAG Select the user bits to be used in the time code generated by the time
code generator.
000
: Character set not specified.
001: 8-bit characters compliant with ISO 646 and ISO 2022.
010: Undefined.
011: Undefined.
100: Undefined.
101: SMPTE 262M page/line multiplex system.
110: Undefined.
111: Undefined.
611 TC OUTPUT PHASE IN EE MODE Select the time code output mode for output from the TIME CODE OUT
connector in E-E mode.
mutng
: Mute the output.
thru: Output the time code input to the TIME CODE IN connector as it is.
v-in: Output the time code with the same phase as the input video signal
phase.
v-out: Output the time code with the same phase as the output video
signal phase.
612 TC OUTPUT MUTING IN SEARCH
MODE
Select whether to mute the output from the TIME CODE OUT connector
in jog/shuttle mode.
on
: Mute.
off: Do not mute.
619 VITC Specify whether or not to record the VITC generated by the internal time
code generator.
off: Do not record internally generated VITC.
on
: Record internally generated VITC.
Note
Even if this item is set to “off,” VITC is recorded if the input video signal
contains VITC and the VITC line is set to “thru” with item 723.
626 TC MODE Select the time code recording mode.
int preset
: Set an initial value, then record the output of the internal time
code generator.
int regen: Record the output of the internal time code generator,
initialized to time code following continuously upon the time code of
the last frame of the last clip on the disc.
ext regen: Record the output of the internal time code generator,
synchronized to an external time code generator.
rp188 regen: Record the output of the internal time code generator,
synchronized to SMPTE RP188 LTC in an SDI signal.
ext preset: Directly record the input of an external time code generator.
See 4-1-2 “Recording Time Code and User Bit Values” (page 50) for
more information about time code recording modes.
627 RUN MODE When item 626 is set to “int preset,” select the run mode of the internal
time code generator.
free run
: Time code advances continually.
rec run: Time code advances only during recording.
628 DF MODE In 525(U)/525(J)-line modes, when item 626 is set to “int preset,” select
the run mode of the internal time code generator and counter.
on (df)
: Drop-frame mode
off (ndf): Non-drop frame mode
629 TC SELECT Select the type of time data to show in the time data display, and the type
of external time code when item 626 is set to “ext regen.”
vitc: Display time code as VITC, or select VITC as the external time
code.
tc
: Display time code as TC, or select TC as the external time code.
See 4-1-2 “Recording Time Code and User Bit Values” (page 50) for
more information about selecting external time code.
Menu items in the 600s, relating to the time code, metadata, and UMID
Item number Item name Settings