Filter
Top Products
Chapter 8 Menus
87
8-2 Basic Setup Menu
011 CHARACTER V-SIZE Determine the vertical size of characters such as time code output from the
VIDEO OUT 2 (SUPER) connector and SDI OUT 2 (SUPER) connector for
superimposed display on the monitor.
:Standard size
×2 :2 times standard size
When setting this item, watch the monitor screen, and adjust to the required state.
012 CONDITION DISPLAY ON
VIDEO MONITOR
Select whether to display disc condition marks in external monitor output (output
from the VIDEO OUT 2(SUPER) and SDI OUT 2(SUPER) connectors).
dis
: Do not display (disable).
ena: Display (enable).
013 525/625 SYSTEM SELECT Specify whether to enable switching between 525(U)-line, 525(J)-line and 625-line
modes.
off
: Do not enable system switching.
on: Enable system switching.
For the switching between 525(U)/525(J)/625-line modes, see page 90.
Note
When you switch line modes, all basic menu and extended menu items are set to
the factory defaults for the selected line mode.
016 ALARM DISPLAY Select whether or not to display alarm messages.
off: Do not display alarm messages. (However, certain important alarms are
displayed).
limit: Display only a minimum number of alarm messages.
on
: Display all alarm messages.
For details about alarm message display conditions, see 9-3-1 “Alarm List” (page
115).
017 SUB STATUS DISPLAY
SELECT
Determine the kind of sub status information to be output from the VIDEO OUT 2
(SUPER) connector and SDI OUT 2 (SUPER) connector.
off
: Do not output sub status information.
tc: Settings of items 626, 627, and 619
rmain: Available disc space (unit: minute)
clip: Selected clip number/total number of clips
edit: Edit preset state
ed&tc: Edit preset state and settings of items 626, 627, and 619
Note
When menu item 005 is set to “off,” sub status information is not displayed when
this item is set to anything other than “off.”
024 MENU CHARACTER
TYPE
Determine the type of characters in menu text output from the VIDEO OUT 2
(SUPER) connector and SDI OUT 2 (SUPER) connector for superimposed display
on the monitor.
white
: White letters on a black background.
black: Black letters on a white background.
W/out: White letters with black outline.
B/out: Black letters with white outline.
When setting this item, watch the monitor screen, and adjust to the required state.
029 STORED OWNERSHIP Specify whether to enable changing UMID ownership information settings
(COUNTRY, ORGANIZATION and USER).
off
: Do not enable.
on: Enable.
See 8-3-3 “Using UMID Data” (page 104) for more information about UMID.
031 RECORDING FORMAT Select the recording format.
IMX50
: MPEG IMX 50
IMX40: MPEG IMX 40
IMX30: MPEG IMX 30
DVCAM: DVCAM
Item number Item name Settings
×
1