Sony RDR-DC200 DVD Recorder User Manual


 
27
Hookups and Settings
Connecting an External Decoder
You can watch or record external decoder (PAY-TV/Canal Plus analogue decoder)
programmes if you connect a decoder (not supplied) to the recorder. Disconnect the recorder’s
mains lead from the mains when connecting the decoder.
To watch the connected external decoder (PAY-TV/Canal Plus analogue decoder)
programmes while the recorder is in standby mode, set “Standby Mode” to “Mode 2” in the
“System 1” setup (page 87). If not, the picture will not appear.
Note that when you set “LINE 3 Out [LINE 1 In]” to “Video [Decoder]” or “RGB [Decoder]”
in step 5 of “Setting external decoder (PAY-TV/Canal Plus analogue decoder) programme
positions” (page 28), you will not be able to select “L1” because Line 1 will become a
dedicated line for the decoder.
Connecting a decoder
TV
Aerial cable
(supplied)
SCART cable
(not supplied)
External decoder (PAY-TV/
Canal Plus analogue decoder)
to AERIAL OUT to i LINE 1/DECODER
DVD recorder
to AERIAL IN
to SCART input
SCART cable
(not supplied)
to T LINE 3 – TV
,continued