Filter
Top Products
92
b
If your TV does not accept S-video or RGB
signals, the image will not be displayed in the
selected method on the TV screen even if you
select “S-Video [S-Video],” “RGB [Video/
RGB],” or “RGB [Decoder].” Refer to the
instructions supplied with your TV.
Selects the colour system when picture noise
appears. This setting is effective when you
record an analogue broadcast or an external
input.
Selects the type of video signals output from
the HDMI OUT jack. If the picture is not
clear, natural or to your satisfaction, try
another option that suits the disc and your
TV/projector, etc. For details, refer also to
the instruction manual supplied with the TV/
projector, etc.
b
When picture noise appears after you change the
“HDMI Resolution” setting, hold down x (stop)
on the recorder, and press Z (open/close) on the
recorder.
S-Video
[S-Video]
Outputs/inputs S-video
signals.
RGB [Video/
RGB]
Outputs RGB signals/
inputs video signals or
RGB signals.
RGB
[Decoder]
Outputs RGB signals.
Select this when
connecting to an external
decoder (PAY-TV/Canal
Plus analogue decoder). If
you connect to a cable box/
satellite receiver such as
CanalSat, do not select this
option.
Input Colour System
Auto Recorder automatically
detects signals of colour
systems and selects the
appropriate colour system.
PAL Selects the PAL colour
system.
SECAM Selects the SECAM colour
system.
HDMI Resolution
Auto (1080p) Normally select this.
The recorder outputs
signals starting from the
highest resolution
acceptable to the TV:
1080p > 1080i > 720p >
576p(480p)
If the resulting image
format is undesirable, try
another setting that suits
your TV.
1080i Outputs 1080i video
signals.
720p Outputs 720p video signals.
576p Outputs 576p(480p) video
signals.