Filter
Top Products
33
Seven Basic Operations — Getting to Know Your DVD Recorder
To use the number buttons
You can also use the number buttons to enter
characters.
1 In step 5 above, press a number button
repeatedly to select a character.
Example:
Press the number 3 button once to enter “D.”
Press the number 3 button three times to enter
“F.”
2 Press SET and select the next character.
3 Select “Finish” and press ENTER.
z Hints
• You can erase all displayed characters by pressing and
holding CLEAR for 2 seconds or more.
• You can switch between “A” (upper-case), “a” (lower-
case), or “Symbol” even if you press INPUT SELECT.
6. Labelling and Protecting
a Disc
You can execute options effective for the entire
disc using the Disc Information display.
1 Insert a disc.
See “Inserting a Disc” on page 25.
2 Press TOOLS to select “Disc Info,” and
press ENTER.
Example: When the inserted disc is a DVD-
RW (VR mode).
3 Select “Disc Name,” and press ENTER.
Enter the disc name in the “Input Disc Name”
display (page 32).
b Note
You can enter up to 64 characters for a DVD’s disc name.
The disc name may not appear when the disc is played on
other DVD equipment.
Labelling a disc
1 2 3
4 6
7 8 9
0
5
TOOLS
</M/m/,,
ENTER
+
RW
-
RWVR
-
RW
Video
-
R
+
R
Off
Format
Disc Name
Disc Information
DiscName
Media DVD-RW Format VR
Title no. / Playlist 2
2. 3 / 4. 7
Close
Erase All
Finalize
HQ : 0H30M HSP : 0H45M SP : 1H00M
LSP : 1H15M LP : 1H30M EP : 2H00M
SLP : 3H00M SEP : 4H00M
Remainder
Date
13.10.2005 ~ 28.10.2005
Original 3
GB
Protect Disc
,continued