Filter
Top Products
38
1 Press [TIMER].
• If the “Timer – ShowView” display appears,
press < to switch the display to
“Standard”.
2 Select an item using </, and adjust
using M/m.
“Date”: Sets the date.
The item changes as follows:
Today y Tomorrow y …… y Thu
28.10 (1 month later) y Sun (every Sunday)
y …… y Sat (every Saturday) y
Mon-Fri (Monday to Friday) y Mon-Sat
(Monday to Saturday) y Sun-Sat (Sunday to
Saturday) y Today
“Start”: Sets the start time.
“Stop”: Sets the stop time.
“Prog.”: Selects the programme or input
source.
“Mode”: Selects the recording mode
(page 36).
• If you make a mistake, select the item and
change the setting.
3 Select “OK,” and press ENTER.
The Timer List (page 42) appears. The
TIMER REC indicator lights up on the front
panel and the recorder is ready to start
recording.
Unlike a VCR, there is no need to turn off the
recorder before the timer recording starts.
To stop recording during timer recording
Open the remote’s cover and press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Rec Mode Adjust
If there is not enough available disc space for the
recording, the recorder automatically adjusts the
recording mode to enable the entire programme to
be recorded. This function is normally set to “On.”
To cancel this function, press TOOLS while the
Timer List is displayed. Select “Rec Mode
Adjust” and press ENTER. Select “Off” and press
ENTER.
If the timer settings overlap
Overlapped timer settings are shown as follows.
To store the setting as shown, select “OK.” The
programme that starts first has priority and the
second programme starts recording only after the
first programme has finished.
To cancel the overlapped setting, select “Cancel.”
To confirm, change, or cancel timer recording
See “Checking/Changing/Cancelling Timer
Settings (Timer List)” on page 42.
To extend the recording duration time while
recording
1 Press TOOLS during recording to select
“Extend Rec,” and press ENTER.
2 Press M/m to select the duration time.
You can set the duration in increments of 10
minutes, for a maximum of 60 minutes.
3 Select “OK” and press ENTER.
Timer - Standard
Set the timer manually.
Cancel
ShowView
Date
OK
Mode
Today
Prog.
:
Start
:
Stop
Timer
These timer settings overlap.
Wed 21:00-22:00 AAB SP
Wed
29.10
29.10 20:30-22:00DEF SP
OK Cancel
Do you want to continue?
Extend Rec. Time
Set the timer extend function.
Wed
OK
Cancel
Extend Time
Off
28.9 10:00 - 11:30 AAB SP