Filter
Top Products
15
Notes on operating your
components
When you use a double cassette
deck
You need to select deck A or B before
operating. To select the deck, press DECK
B/A to switch the display between
“DECK A” and “DECK B”.
Be sure that you have set a component
code each for DECK A and DECK B
(page 8).
However, if you have assigned a cassette
deck to another Component Select button
(page 35), you can only select either
DECK A or DECK B.
About the input select of a TV
Each time the INPUT key is pressed, the
input is changed in order. It is also
possible to select directly as follows
when you are connecting more than two
VCRs.
“INPUT” + “0” : TV tuner
“INPUT” + “1” : VIDEO1
“INPUT” + “2” : VIDEO2
“INPUT” + “3” : VIDEO3
“INPUT” + “4” : VIDEO4
“INPUT” + “5” : VIDEO5
“INPUT” + “6” : VIDEO6
If the above operations do not work,
program the remote control signals of
your component on the Commander
using the learning function (page 16).
About the input select of a VCR
Each time the INPUT key is pressed, the
input is changed in order. It is also
possible to select directly as follows.
“INPUT” + “0” : Tuner
“INPUT” + “1” : LINE1
“INPUT” + “2” : LINE2
“INPUT” + “3” : LINE3
“INPUT” + “4” : LINE4
“INPUT” + “5” : DV
When you use a Sony VCR, the above
commands are preset. For other brands, it
is possible to “teach” the above double-
key operations using the learning
function (see page 16).