Filter
Top Products
24
If a series of commands is already
programmed for that button
That program will be displayed. (At
the factory, the SYSTEM CONTROL 1
button is preset with the System
Power-Off function for Sony
components (the same function as
explained in page 34), and the
SYSTEM CONTROL 3 button is
factory preset with standard power-
on command for nearly all Sony
components.)
To program a new series of
operations, clear the program first
(see page 26).
2 Press the Component Select
buttton for the component to
operate.
The keys for the selected component
flash.
If the component has the power-
on and power-off signals
Both the OFF and ON keys are displayed
and you can select either of them to
program.
It is useful to set the exact command for
power-on or power-off and operate the
component regardless of its status (on/off).
Example: To program the
procedure above to the SYSTEM
CONTROL 2 button
1 While pressing COMMANDER
OFF, press one of the SYSTEM
CONTROL buttons (in this case,
SYSTEM CONTROL 2).
All the component names flash.
Programming a series of
commands to the SYSTEM
CONTROL buttons
Executing a Series of Commands
— System Control Functions
(continued)