Filter
Top Products
57
Symptom
The power of the
Commander turns off by
itself.
The power of the
Commander does not
turn on when you press a
button.
Your Commander does
not work as expected
after data transfer.
Remedy
•This Commander is preset at the factory to switch the power off
automatically after 10 minutes if left unused. (Auto Power-Off, page 49)
You can change the power-off time from 10 to 90 minutes, or set the
Commander not to power off automatically.
•The Hold function is on (“OFF” appears on the display). Unlock the
Hold function (page 47).
•Data transfer to/from a single button cannot transfer System Control
functions that are learned by Component Select buttons. Either set up
the learned Commander from the start, or perform whole data transfer.
Note on the Commanders with the mark
Data transfer between Commanders with the
mark may not always be complete, depending on
their functions and keys, and some of the System Control function data may be dropped.
For the customers in the U.S.A.
Customer Support Information
After you have read through this manual, if you still cannot get the Remote Commander to work
properly, call the Sony Customer Support Helpline at 1-800-822-2217.