Filter
Top Products
48
2 Press the POWER OFF key.
All the component names stop
flashing and stay lit, and “POWER
ON” flashes.
3 Press COMMANDER OFF.
When the preset lock is on
If you try to set a component code
number (page 8) or perform learning for
the Component Select buttons (page 32),
“NG” will flash on the display.
To unlock the preset lock
To unlock the preset lock, follow the
same procedure as the above and press
the POWER ON key in Step 2. “POWER
OFF” appears on the display.
Protecting your
settings
— Preset Lock Function
You can lock the Commander so that you
can not change, add, or clear any of your
component code settings (page 8).
1 While pressing COMMANDER
OFF, press MUTING.
All the component names flash and
“POWER OFF” appears.