Filter
Top Products
9
Getting Started
Setting up for your PC
By installing the “AX1400 Remote
Editor” on the supplied CD-ROM onto
your PC, you can set up the Remote
Commander simply with your PC.
“AX1400 Remote Editor” makes setting
up a complex series of operations (a
macro) easy, and also allows various
other convenient functions to be set up.
For details, see the Help menu provided
in “AX1400 Remote Editor.”
“AX1400 Remote Editor” system
requirements
Operating systems (manufacturer
installed):
Windows XP Media Center Edition
2005/Windows XP Media Center
Edition 2004/Windows XP Media
Center Edition/Windows XP
Professional/Windows XP Home
Edition/Windows 2000 Professional
Computer:
IBM PC/AT or compatible (The
software does not run on Macintosh
operating system)
CPU:
Pentium II 400 MHz or more
Required Hard Drive Capacity:
20 MB or more
RAM:
64 MB or more (128 MB or more for
Windows XP)
Display:
High (16 bits) color or higher,
1024 × 768 dots or better*
Required Peripherals:
CD-ROM Drive, USB port
* Does not operate with a display of under
1024 × 768 dots.
Installing the “AX1400
Remote Editor”
Follow the instructions below to install.
Notes
• Do not simply copy the “AX1400 Remote
Editor” folder in the supplied CD-ROM to a
PC. You need to install it properly for it to
work.
• Administrator privileges are required for
installation on PCs running Windows 2000 or
Windows XP.
1 Close all software running on
Windows.
2 Insert the supplied CD-ROM into
the CD-ROM drive of the PC.
After a moment, “RM-AX1400 Install
CD Menu” appears.
3 Click [Install AX1400 Remote
Editor].
“AX1400 Remote Editor 1.0 Setup”
appears.
Continued