Filter
Top Products
11
Getting Started
Setups for the player
Some setup adjustments are necessary for the player
depending on the TV or other components to be
connected.
Use the setup display to change the various settings.
For details on using the setup display, see page 64.
• To connect the player to a wide-screen TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “16:9” (default setting). For details, see page
68.
• To connect the player to a normal TV
In the setup display, set “TV TYPE” in “SCREEN
SETUP” to “4:3 LETTER BOX” or “4:3 PAN SCAN.”
For details, see page 68.
• To connect the player to a TV or VCR via a SCART
(EURO AV) connector that conforms to the S video
signals or RGB signals
In the setup display, set “LINE” in “CUSTOM SETUP”
to “S VIDEO” or “RGB.” For details, see page 70.
• To connect the player to a monitor or projector with
component video input connectors that conform to
the output signals from the COMPONENT VIDEO
OUT (Y, C
B, CR) connectors on the player
In the setup display, set “COMPONENT OUT” in
“CUSTOM SETUP” to “ON”. For details, see page 70.
When you play a disc recorded in the NTSC color
system, the player outputs the video signal or the
setup display etc. in the NTSC color system and the
picture may not appear on PAL color system
televisions. In this case, open the disc tray and
remove the disc.