Filter
Top Products
80
Settings and Adjustments
To
Select a disc
during playback
Skip by 10 discs in
continuous play
mode
Stop
Pause
Resume play after pause
Go to the next track
during playback
Go back to the preceding
track during playback
To control the player again
Press MEGA CONTROL on the player or MEGA on the
remote.
The MEGA CONTROL button on the player turns off and
you can control the player.
Operation
Press the number button on the
remote and ENTER, or M/m and
ENTER, or turn the click shuttle
slowly and press ENTER.
Or, press DISC CHANGE to turn
the indicator on followed by
turning the .–/>+ dial and
then pressing it.
Press </, and then press
ENTER.
Press x.
Press X.
Press X or H.
On the player:
Press DIRECT SEARCH to turn it
on and turn the .–/>+ dial
clockwise.
On the remote:
Press >.
On the player:
Press DIRECT SEARCH to turn it
on and turn the .–/>+ dial.
counterclockwise
On the remote:
Press ..
6 Press H on the player to start playing.
Playback starts and the display shows the current disc
and track numbers and the playing time of the track.
While the MEGA CONTROL button on the front panel
is lit, you can control the CD changer with the controls
on the player as follows:
Controlling the CD Changer (Mega Control)
Notes
• Connect only a Sony 5/50/200/300 CD changer to the MEGA
CONTROL jack.
• You cannot locate a particular point on a CD’s track using the
controls on the player.
• Depending on the CD changer, some controls on the player
may not operate the CD changer as they do the player.
• You cannot control the player when the MEGA CONTROL
button on the front panel is lit.
• The player will not enter Resume Play after the MEGA
CONTROL button on the front panel has been turned on and
off.
• You cannot control the CD changer right after turning on the
player or connecting the CD changer. Wait a few seconds until
the player recognizes the CDs.
• When the MEGA CONTROL button is lit, you cannot use the
Control Menu and Disc Browser.