Filter
Top Products
12
Getting Started
CD
L
R
DIGITAL IN
OPTICAL
COAXIAL
INPUT
S VIDEO
AUDIO OUT DIGITAL OUTAUDIO IN
OPTICALCOAXIAL
PCM/DTS/MPEG/
DOLBY DIGITAL
Y
C
B
C
R
MEGA
CONTROL
S VIDEO
OUTPUT
VIDEO
OUTPUT
COMPONENT
VIDEO OUT
T LINE-1 (RGB) - TV
WOOFER OUT
L
R
L
R
i LINE-2
Receiver (Amplifier) Hookups
This connection is for listening to the sound through
speakers connected to a receiver lacking a built-in DTS,
Dolby* Digital or MPEG decoder. Refer as well to the
instructions supplied with the component to be
connected.
* Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks
of Dolby Laboratories.
Confidential unpublished works. ©1992-1997 Dolby
Laboratories. All rights reserved.
Required cords
Audio connecting cord (not supplied) (1)
S video cord (supplied) (1)
White (L)
Red (R)
White (L)
Red (R)
CD/DVD player
To AUDIO
OUT (R, L)
TV
To audio input
: Signal flow
Receiver
(Amplifier)
To mains
To S VIDEO
OUTPUT
To DIGITAL OUT (OPTICAL)
Take off the cap.
To
DIGITAL
OUT
(COAXIAL)
or
or
To optical
digital input
To coaxial digital input
Receiver
(Amplifier) with
a digital
connector, MD
deck, DAT deck,
etc.
When connecting the cords, be sure to match the color-coded
cord to the appropriate jacks on the components: Red (right) to
Red and White (left) to White. Be sure to make connections firmly
to avoid hum and noise.
If you have a digital component such as a receiver (amplifier)
with a digital connector, DAT or MD, connect the component via
the DIGITAL OUT OPTICAL or COAXIAL connector using an
optical or coaxial digital connecting cord (not supplied).
Optical digital connecting cord (not supplied) (1)
Coaxial digital connecting cord (not supplied) (1)
To S VIDEO
input
Do not connect the power cord to a switched mains such
as the AC outlet (mains) on a receiver (amplifier). Doing so
may cause the Playback Memory, Bookmark, Disc Browser
and menu settings to be cancelled when you turn off the
receiver.