TOA Electronics C-RM1000 CU Universal Remote User Manual


 
40
When selecting “Setting” …
1. Select [GROUP] while the menu is displayed and press the
SET key. The setting content is displayed on the second
line.
2. Select [1. SET] and Press the SET key. The group number
flashes, permitting the current group setting contents to be
checked.
3. Press the SET key to perform settings in succession from
Group 1.
4. Select Control ON or OFF and press the SET key.
ON: The group being set can be operated.
OFF: The group being set cannot be operated.
5. Select the DVR number and press the SET key.
6. Set the number of DVR channels by selecting either 9 or
16 and press the SET key.
7. To continue to assign the next DVR to the group, select the
DVR number and press the SET key.
Repeat Steps 5 and 6 to perform settings.
8. To set the next group, select [NEXT] and press the SET
key.
The next group number is displayed, and the Control
ON/OFF selection screen appears. Repeat Steps 4
-
6.
9. Assign all of DVRs 1
-
8 to any group, then press the SET
key.
[ Setting contents ]
1. Setting Performs settings of the Digital Video Recorder groups and their control.
2. Transfer
Transfers group setting data to other Remote Controller via the C-RF1000
Interface Unit.
3. Erase Deletes all group settings.
12.4. Function Settings
Follow the instructions in p. 39; Basic Setting Operations to perform the following menu displays and
operations.
12.4.1. Group settings
Assigning two or more Digital Video Recorders to the same group permits their images to be viewed on a
single monitor. Up to 8 groups can be set.
Notes
The group setting can only be performed in DVR ID numerical order, and can only be performed in
consecutive numbers.
When multiple Remote Controllers are connected, match the group settings of each Remote controller.
Otherwise, the camera images cannot be displayed correctly on the monitor.
GROUP
1.SET
1
2
3
4
5
SET 1
1
SET 1 ON
SET 1 ON
DVR 1
SET 1 ON
DVR 1 16
6
SET 3 ON
DVR 8 16
SET 1 ON
DVR NEXT
O
1
8
6
N
SET 1 ON
DVR 2 16
Control
[ON] [OFF]
DVR No. or “Next”
No. of DVR channels
Group No.