Toshiba 50L2200U Projection Television User Manual


 
103
Using the TV’s features
Automatic Power Down
To display the time remaining until the TV turns off, press the
SLEEP button.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.
Automatic Power Down
The TV can be configured to automatically turn itself off after 4
hours if you do not operate the TV either from the remote control or
the TV control panel.
1 From the Preferences menu, highlight Energy Saving
Settings and press ENTER.
2 Press the ( / arrow) buttons to select Automatic Power
Down.
3 Press the ( / arrow) buttons to select On or Off, and press
EXIT.
The default setting of this feature is Off.
One minute before the TV switches to standby, a warning message
will appear.
When the following features are set, the feature that is set for the
nearest time will function.
Automatic Power Down
Sleep Timer
No signal auto power off (after 15 minutes of no signal)
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
Low signal strength of analog channel (no signal detection)
Only Audio L/R is connected to external input to listen to
music through the TV speakers.
To change the No Signal Power Down setting:
1 From the Preferences menu, highlight Energy Saving
Settings, and then press ENTER.
2 Press the ( / arrow) buttons to select No Signal Power
Down, and then press ENTER.
NOTE