Toshiba 50L2200U Projection Television User Manual


 
51
Setting up your TV
Setting the AV input mode
Skipped channels cannot be selected with the CH arrow buttons,
however, they can be accessed using the number keys on the remote
control.
If an encrypted channel is accidentally added to the channel list
while programming channels, you can remove the unwanted
encrypted (non-viewable) channel while you are channel surfing.
To remove encrypted channels from the channel memory:
Tune to an encrypted channel.
The following message appears:
(Sample Illustration) Removing an encrypted channel
Press the 1 button while the message is displayed to remove the
unnecessary channel from the channel list.
Setting the AV input mode
This setting determines the configuration of the shared AV input on
your TV. You can set this input for either ColorStream HD or
Video.
Setting the HDMI
®
audio mode
To set the HDMI
®
audio mode:
1 Press the MENU button and open the Sound menu.
2 Highlight Audio Setup, and then press the ENTER button.
3 Press the ( / arrow) buttons to select HDMI 1 Audio, and
then press the ( / arrow) buttons to select the HDMI 1 audio
mode (Auto, Digital, or Analog). (Auto is the recommended
NOTE