Filter
Top Products
26
Connecting Your TV
Connecting a Blu-ray™/DVD Player with ColorStream
®
Please note that 1080p is not supported. Check the User’s
Guide of the DVD player in order to determine the best
output signal available.
❖ If your DVD player or satellite receiver does not have
component video, connect a standard A/V cable to the
AUDIO/VIDEO terminal. If your DVD player has
HDMI
®
video, see “Connecting an HDMI® or DVI device
to the HDMI® input” on page 27.
When you use ColorStream
®
HD or Video, switch to the appropriate
AV input mode.
To view antenna or Cable channels:
Select the ANT/CABLE video input source on the TV.*
To view the DVD player:
Turn ON the DVD player. Select the ColorStream
®
HD video
input source on the TV.*
To view satellite programs using the component video
connections:
Turn ON the satellite receiver. Select the ColorStream
®
HD video
input source on the TV.*
To view the VCR or view and record antenna channels:
Turn ON the VCR. Tune the VCR to the channel you want to
watch. Select the VIDEO video input source on the TV.*
To record a TV program while watching a DVD:
Turn ON the VCR. Tune the VCR to the channel to record. Select
the ColorStream
®
HD video input source on the TV* to view the
DVD.
*To select the video input source, press the INPUT button on the
remote control. See “Selecting the video input source” on page 55.
The unauthorized recording, use, distribution, or revision of
television programs, videotapes, DVDs, and other materials is
prohibited under the Copyright Laws of the United States and other
countries, and may subject you to civil and criminal liability.
NOTE
NOTE