Filter
Top Products
30
Connecting Your TV
Connecting a digital audio system
❖ If several devices are connected, the HDMI
®
CEC Control feature
may not operate properly.
❖ For proper operation, it is recommended that you use an HDMI
®
cable with the HDMI
®
Logo ( ).
Before controlling the device(s):
❖ After completing the above connections, configure the HDMI
®
CEC Setup menu with the desired settings, see “HDMI® CEC
input source selection” on page 106.
❖ The connected devices must also be configured. For details, see
the operation manual for each device.
❖ This feature uses the CEC technology as regulated by the
HDMI
®
standard.
❖ This feature is limited to models incorporating Toshiba’s
HDMI
®
CEC. However, Toshiba is not liable for those
operations. Refer to the individual instruction manuals for
compatibility information.
This feature may not work properly depending on the devices that are
connected.
Connecting a digital audio system
The TV’s DIGITAL AUDIO OUT terminal outputs a Dolby
®
Digital or 2-channel down-mixed PCM (pulse-code modulation)
signal for use with an external Dolby
®
Digital decoder or other
external audio system with optical audio input.
NOTE
NOTE