Filter
Top Products
65
Using the TV’s features
Selecting the picture size
2 Press and hold the CH RTN button for a few seconds until the
message “Memorized” appears on the screen. The channel has
been programmed to the CH RTN button.
3 You can then change channels repeatedly, and when you press
the CH RTN button, the memorized channel will be tuned.
The TV will return to the memorized channel one time only. Once
you press the CH RTN button and then change channels again, the
CH RTN memory will be cleared and the button will function as
Channel Return, by switching back and forth between the last two
channels that are tuned.This feature also works for external inputs.
Selecting the picture size
You can view many program formats in several picture sizes—
Native, 4:3, Full, TheaterWide 1, TheaterWide 2, TheaterWide 3,
Normal, and Dot by Dot.
The picture size illustrations are examples only. The format of the
image (in any of the picture sizes) depends on the format of the
signal you are currently watching. Select the picture size that
displays the current program in the way that looks best to you.
You can save separate picture size preferences for each input on
your TV.
To select the picture size:
1 Press the PIC SIZE button on the remote.
2 With the Picture Size menu displayed, do one of the following:
❖ Repeatedly press the PIC SIZE button.
❖ Press the corresponding number button (0-5) while the
Picture Size menu is displayed.
❖ Press the ( / arrow) buttons while the Picture Size
menu is displayed.
Using these functions to change the picture size (that is, changing
the height/width ratio) for any purpose other than your private
viewing may be prohibited under the Copyright Laws of the United
States and other countries, and may subject you to civil and criminal
liability.
NOTE
NOTE