Filter
Top Products
Connecting a DTV receiver/set-top box with
ColorStream ®(component video} and a VCR
This connection allows you to watch DTV (digital TV broadcast),
VCR, and TV programs, and record DTV and TV programs. You can
record from one source while watching a program from another
source.
Your TV has ColorStream ®(component video) inputs. Connecting
your TV to a DTV receiver with component video can greatly
enhance picture quality and realism.
You will need:
• three coaxial cables
• two sets of standard A/V cables
• one set of component video cables
• one pair of standard audio cables
From
Antenna Stereo VCR
Note:
For thehighestpossiblepicture quality,use
component videocablesCora DVl D digital
single link cable] betweenthe TVandDTV
receiveL
Youcan connectcomponent videocables
from the DTVreceiverto eitherset of
CelorStreamterminalson the TVCHD I or
HD 2].
TheColorStreamHD l andHD_ terminals
canbe usedwith ProgressiveC480p,720p]
andInterlaced C480_lO80i) seansystems.
#your DTV receiveris not compatible
wi_l component video CorDVI/HDCP], use
anS videocable Cplusan audio connection]
insteac_
Torecord from the DTVreceiver,setthe VCR
to Line IN. Tomonitor recording from theDTV
receiver,set the VCRto Line IN andthe 7Vto
VIDEO 1
Theunauthorizedrecording,use,distribution, I
orrevisionoftelevisionprograms,videotapes, ]
DVDs,andothermaterialsis prohibitedunder ]
theCopyrightLawsofthe UnitedStatesand ]
othercountries,andmay subjectyonto civil ]
andcriminal liability. I
From
DTV Antenna
14