Filter
Top Products
Using the volume lock feature (8000)
For the TX,(CABLE/SAT, VCR, and DVD mode,t, the volmne
controls (VOL &l r and MUTE) can be programmed (locked) to the
selected device mode. This feature does not apply to the AUDIOI/2
modes.
For example, to lock the volume controls to always jump to tile
CABLE/SAT mode:
1. Repeatedly press MODE to select the CABLE/SAT mode.
2. While holding down the RECALL button, press 8 -0 -0 -0.
3. Press VOL &.
The Mode indicator will blink two times (locked).
The following table describes in more detail the Volume Lock
implementation.
TV
BV/S T
CB_SAT VCR DVD
'IN 'IN TV
CB_SAT CBUSAT CBL/SAT
VCR VCR ¥CR
DVD DVD D_)
AUDI AUD1 AUD1
AUD2 AUD2 AUD2
AUD] IAUD2 I
AUD1 lAUD2 I
AUDI lAUD2 [
AUDllAUD2 I
AUDllAUD2 I
AUDlfAUDI I
AUD21AUD2 I
To reset the volume controls to the original device code:
1. While holding down the RECALL button, press 8 -0 -0 -0.
2. Press VOL Y.
The Mode indicator will blink four times (unlocked).
Number
MODE
VOL& •
RECALL
Operational feature reset (8900)
This feature clears all _tup features not related m "Device code set
up" and resets the Volume Lock to "TV."
To reset tile features:
While holding down the RECALL button, press 8 -9 -0 -0.
The Mode indicator will blink two times, and then pause and
blink two more times.
23