Filter
Top Products
Using the auto aspect feature
When receiving 480i signal, the TV will automatically change the
picture size by reading aspect information (1D-1 data) from the input
signal. If the signal does not include aspect information (1D-1 data),
tile picture size mode you set is selected.
To turn on the auto aspect:
1. Press MENU, and then press • or • until the THEATER menu
appears.
DoEby Virtual OFF
TruSass OFF
PECTURE S_ZE
OFFA • APE •
PY_UR_ S_ROLL V i DE_ X
C_NEMA MODE
2. Press•or•to highlightAUTOASPECT, and then press•or
• m select ON.
Note:
Thisfeature doesnot operate forthe antenna
(cable5andDVIinputsources.
MENU
AV4f D,,
DoEby Virtua_ OFF
WOW
SRS 3D ON
FOCUS ON
TruSass OFF
C_NEMA MODE VIDEO
4:3 Normal
16:9Full
4:3 Letter box
Not Defined
Selecting the cinema mode
When you view a DVD movie (3-2 pulldown processed) from a DVD
player connected to the ColorStream (component video) or DVI/
HDCP inputs on the TV, smoother and more natural motion can be
obtained by setting the CINEMA MODE to FILM (auto).
To set the CINEMA MODE to FILM (auto):
1. Press MENU, and then press • or • until the THEATER menu
appears.
2. Press • or • to highlight CINEMA MODE.
3. Press • or • to select FILM (auto).
NOTICE OF POSSIBLE ADVERSE
EFFECTS ON Plasma display
Avoid displayingstationary imageson
your Plasmadisplayfor extended periods
of time. Fixed(non-moving) images
(suchasstill PIP/POPwindows orblacW
graybars in 4:3screen pictureor PIP/
POPformats) can becomepermanently
engrained in the Plasmadisplay.This
type ofdamage is NOT COVERED BY
YOUR WARRANTY because itis the
result of misuse.See item33on page4.
DoEby Virtue_ OFF
WOW
SRS 3D ON
FOCUS OFF
TruBass OFF
PECTURE SEZE
AUTO ASPEGT OFF
To set the CINEMA MODE to VIDEO (off):
Press • or • to select VIDEO in step 3 above.
38