Filter
Top Products
Connecting a device to the TheaterLink
The TheaterLink allows you to remotely operate (through the TV)
most infrared-controlled devices* (such a_sa Toshiba infrared-
controlled VCR or DVD player) endosed within an entertainment
center or similar cabinet. Without the TheaterLink, the device
typically would need to be visible to operate it remotely.
You can use the TV's remote control (programmed to operate
the device; see pages 19-25) or the device's remote control. Point
the remote control at the front of the TV and press the button for the
desired function. The signal passes from the remote control through
the TV to the device via the TheaterLink cable (included with your
TV).
To connect, align the TheaterLink cable's infrared "eye" with the
device's infrared sensor and attach it using double-sided mounting
tape (included with the cable in the accessory pack). Plug the other
end of the TheaterLink cable into the TV's TheaterLink OUT
terminal.
You will need:
• one TheaterLink cable (included)
• one piece of double-sided mounting tape (included)
TheaterLink
cable's infrared
Front of infrared-controlled device*
(such as aToshiba infrared-controUed
VCR or DVD player)
device's infrared
Back of TV
With thisconnection,point the Toshiba
TVremote control at the frontof the 71/
to operate bob'?the TVand the infrared
controlleddevice (Youalsocanpoint
the device'sremote control at the 7q/to
operate thedevice,but you alsowill
need to usethe TV'sremote control to
operate the TIZ)
mEN
:N
*TheTheaterUnk OUT function has beenverifiedfor use with Toshibafafrared-controlled devices Due to the wide variation in remotecontrol
operation among manufacturers,these functions may or may not operatewith other brands
17