Filter
Top Products
Selecting the Audio OUT sound
This feature allows you to select the sound source (MAIN or POP)
that is output from the AUDIO OUT terminals.
Tl_is is useful when amplifying or recording the POP sound with
external equipment while hearing tile sound of the main picture
through the built-in speakers. See "Connecting an audio system" on
page 18.
To select the Audio OUT sound:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight AUDIO OUT.
3. Press • or • to select MAIN or POP.
_AUDEO
_s ON
_BS LEVEL 100
• MAIN: Outputs the sound of the main program through the
AUDIO OUT terminals.
• POP: Outputs the sound of the POP program through the
AUDIO OUT terminals.
Note:
Makesure the volume control ofyour audio
ampD#er*ssetto amoderate hstening/eveZ
MENU
-- A'_411b
EEl
Using the StableSound _ feature
The StableSound ® feature limits he highest volume level to prevent
extreme changes in volume when the signal source is changed (for
example, to prevent the sudden increase in volume that often happens
when a TV program switches to a commercial).
To turn on the StabieSound ®feature:
1. Press MENU, and then press • or • until the AUDIO menu
appears.
2. Press • or • to highlight STABLE SOUND.
3. Press • or • to select ON.
_S Otq
Note:
Whenthe POPis not on thescreen,the
sound of the maioprogram is ou_ouz,even if
thePOPsound isselected
To turn off the StableSound _'feature:
Highlight OFF in step 3 above.
59