Filter
Top Products
37
FUNCTIONS
TIME SETUP
1.
Highlight “TIME SETUP” and press the “ENTER”
button.
2.
Select your time zone according to the region you
are residing in.
For Australia:
Use the “◄” and “►” buttons in TIME ZONE to select
the local time zone you are located in.
Use the “◄” and “►” buttons in SYNC ON STANDBY
to select whether to let the receiver to synchronize
time with the broadcaster if it is in standby mode.
For other region:
Use the “◄” and “►” buttons in LOCAL TIME to set
your local time. The GMT will change accordingly.
Use the “◄” and “►” buttons in SYNC ON STANDBY
to select whether to let the receiver to synchronize
time with the broadcaster if it is in standby mode.
Notes: The SYNC ON STANDBY function will boot
the receiver from its standby mode to
synchronize time information with the
broadcaster so as to eliminate the time
drifting. It is preset to perform the
synchronization at 3 A.M. provided that the
receiver is in standby mode at 3 A.M.
EXT CONTROL
For details of controlling the HD-C26H receiver by an external device connected via the RS-232 serial port,
consult your local dealer.