Filter
Top Products
47
FUNCTIONS
To check the remaining time:
1.
Once the off-timer has been set, press “SLEEP” button once.
2.
Current remaining time is displayed on the screen, and then turns off after 5 seconds.
To change the off-timer:
1.
Once the off-timer has been set, press “SLEEP” button once.
2.
Current remaining time is displayed on the screen. Before the OSD turns off, press “SLEEP” button again
within 5 seconds, and the off-timer will be changed to the next bigger off-timer value.
For example, if current remaining time is “28 min”, press “SLEEP” button again, and off-timer will be
changed to “30 min”.
OFF 30 min 60 min 90 min 120 min
28 min
If current remaining time is “74 min”, press “SLEEP” button again and off-timer will change to “90 min”.
OFF 30 min 60 min 90 min 120 min
74 min
Note: When the sleep timer has only 1 minute left, an OSD “SLEEP 1 min.” will automatically appear and stay on
the screen. When the sleep timer counts down to 0, the receiver automatically shuts down by itself to
standby mode.
AUDIO
1.
Press the AUDIO button on the remote control.
2.
Use the “▲” and “▼” buttons to select the
preferred audio format present in the program you
are watching.
3.
Press the “EXIT” button to cancel the list.
RECALL
The “RECALL” button is used to toggle between present and previous programs
1.
In the case you are viewing Program A, and then you change to Program B. You can press the “RECALL”
button on the remote control to return to previous program A.
2.
Press the “RECALL” button again, and the receiver will show Program B.