Toshiba RD-XS24SB DVD Recorder User Manual


 
12
Introduction
VR mode and Video mode
Available operations differ depending on the recording format of discs. Refer to the list below to select a disc and the
recording format.
HDD (Hard Disc)
DVD-RAM (Ver.2.0/2.1/2.2)
Erasing and repeat recording is
possible.
DVD-RW (Ver.1.1/1.2) (VR mode initialized
*1
)
Erasing and repeat recording is
possible.
DVD-R (Ver.2.0) VR mode initialized
*2
Once you record contents, you
cannot erase them to record others
again. (Deleting a title or chapter is
possible by the editing function,
however the disc space cannot be
restored.)
Both channels of bilingual contents can be
recorded.
There are 3 selections to record sound.
“DVD compatible mode” - “Off”
Both channels of bilingual broadcast are
recorded. You can switch the recorded sound
when playing.
“DVD compatible mode” -“On(Mode l)”
Only the main sound is recoded.
“DVD compatible mode” -“On(Mode ll)”
Only the sub sound is recoded.
Editing functions (deleting titles or chapters,
dividing into chapers, making a Playlist, etc.)
are available.
Contents permitted to be recorded only once
(copy once contents can be recorded.
(CPRM compatible disc only)
Recorded discs can be played only on DVD
players compatible with VR mode of each disc.
Disc which contains copy once contents can be
played only on DVD players compatible with
CPRM.
Compatible disc
Recorded sound
(“DVD compatible
mode”
*2
selection)
Edit function
Copy once contents
Compatibility with
other players
DVD-RW (Ver.1.1/1.2) (Video mode
initialized
*1
)
Erasing and repeat recording is
possible.
DVD-R (Ver.2.0)
Once you record contents, you
cannot erase them to record others
again. (When you copy contents
from the HDD to a DVD-R (Video
mode), be sure to record the
contents with “DVD compatible
mode” set to “On”. Otherwise,
there may be some errors in
dubbing, such as mixing both
sounds of bilingual contents.)
Only one channel of bilingual contents can
be recorded.
Due to DVD-Video format restriction, only one
channel of bilingual contents can be recorded.
There are 2 selections to record sound.
• “DVD compatible mode” -“On(Mode l)”
Only the main sound is recoded.
“DVD compatible mode” -“On(Mode ll)”
Only the sub sound is recoded.
* “Off” is regarded as “On(Mode l)” to record.
Editing functions are not available.
(Only dividing into chapters while recording is
possible.)
Contents permitted to be recorded only once
(copy once contents can not be recorded.
Recoded discs can be played only on DVD
players compatible with Video mode.
Finalizing a recorded disc on this recorder
make it playable on other DVD players.
(Some players may not be compatible.)
*1 Before using a new DVD-RW, select the appropriate recording mode to initialize the disc. For initializing, see
page 26.
*2 If you use a DVD-R in VR mode, first initialize it in VR mode. Once you initialize a DVD-R, you cannot initialize it
again. A DVD-R initialized in VR mode has some restrictions in editing feature. For details, see
page 110.
*3 For “DVD compatible mode”
*
selection, see page 28.
VR mode (DVD Video recording) Video mode
Recording format and disc selection (Continued)
RD-XS24SB_Ope_E_p002-013 8/31/05, 11:51 PM12