Filter
Top Products
29
Playback
Recording
Editing
Others
Introduction
Function setup
Checking the disc space
1) Press REMAIN.
The current capacity per disc is displayed at the
bottom of the screen. The current capacity of the
selected drive is displayed on the front panel display.
2) After checking the capacity, press the button
again to turn off the display.
Selecting the recording mode
1) Select the drive by pressing HDD or DVD.
CONTENT MENU appears.
Pressing the same button turns it off.
2) Press REC MODE repeatedly to select the
recording mode.
Each time you press the button, the recording mode
display on the front panel changes.
e.g. When a 4.7GB single sided DVD-RAM is used
Note
•You cannot change the recording mode while recording.
Recording time Picture quality
XD About 1 hour Superior to “SP”.
SP About 2 hour Standard quality.
LP About 4 hour Inferior to “SP”.
MN Adjustable.
Make the settings of “Manual mode set”
(
page 122).
RD-XS24SB_Ope_E_p025-036 8/31/05, 11:52 PM29