Filter
Top Products
59
Editing
Others
Introduction
Function setup
Recording
Playback
Notes
•Time slip recording/playback stops when the disc is filled up. You can play up to a location where the recorder stopped the
recording. The time slip recording/playback cannot begin if the disc is full.
• The playback picture may appear after a delay of several seconds.
• The playback location will never be identical to the record location in the programme. It will always trail the record location by
a few seconds.
• While using time slip recording/playback, you cannot program a recording.
• While the TIMESLIP indicator is on, you cannot change the setting of the feature that turns off the recorder after a
programmed operation has finished.
• Even while “Auto power off” is selected, the recorder does not turn off if the recording end time comes during playback of a
programme being recorded.
• This function is not available on a DVD-RAM disc when “Relief recording” ( page 123) is set to “On.”
• Playback may jump a few seconds back or pause depending on the disc or data condition.
RD-XS24SB_Ope_E_p049-059 8/31/05, 11:55 PM59